Make curtain wall boards for high-rise buildings. The thickness of aluminum foam board is 10mm, and the thickness of aluminum panel is 0.5mm. The rigidity is over 15Mpa.Energy absorption, sound insulation, heat insulation and other excellent performance, The thermal expansion coefficient is the same inside and outside, ensuring smooth and non-combustion., not combustion, good fire performance.
2. Interior decoration of entertainment venues
Made of aluminum foam sound-absorbing boards for karaoke bars, Nightclub and other entertainment places ceiling and wall sound absorption decoration, noise reduction effect is good, not burning, good fire performance.
3, the production of marble, aluminum foam curtain panel
3mm thick marble, 15mm thick aluminum foam plate composite, than the solid marble slab weight reduced by 2/3, the impact toughness increased by more than 2 times.
4.Make the sound absorption wall of the swimming pool
Due to the high humidity in the swimming pool, the sound absorption ability of ordinary sound-absorbing materials is greatly reduced after water absorption.Noise reduction in natatorium has been a difficult problem in the field of architecture for a long time.The perforated aluminum foam sound-absorbing plate has high sound-absorbing rate. In the humid environment, the sound-absorbing rate does not decrease and the noise reduction effect is good.The thickness of aluminum foam sound absorption plate is 10mm, and a 20mm thick cavity is set behind it.
5. Make soundproof floor
Building sound insulation is a difficult problem, the use of 5mm thick wood, 10 ~ 15mm thick aluminum foam board composite floor, floor spacing sound more than 20 db.
6. Making building acoustic lining
Aluminum foam sound absorption board (thickness of 10mm) is used to make noise reduction lining for recording studio, dubbing room, concert hall, conference hall, sports hall and other occasions to avoid sound echoes. 20-40mm thick cavity is set behind the aluminum foam sound absorption board, which has good noise reduction effect.
